Danfoss SET 3E User Manual

SET3E
10
GB
2.2 Memory Backup
IMPORTANT
If the SET3E is ever disconnected from the mains the display will go
blank but the unit will keep your programme time and settings for
up to 10 hours.
When power is restored the unit will continue to function as normal.
For power cuts or disconnections of greater than 10 hours, when
mains power is restored you must reset the unit (see page 6). This
will reinstate the factory preset programmes and set the time of day
to noon.

Danfoss SET 3E Specifications

General

Brand	Danfoss
Model	SET 3E
Category	Thermostat
Language	English