SET3E
6
GB
1.0 User Instructions
1.1 Your Programmer
The SET3E allows you to switch your hot water and heating on and off
automatically, at times that suit you.
The programmer provides 2 ON times and 2 OFF times per day, and
by the use of a simple rocker switch you can run your heating and hot
water separately, to suit your lifestyle.
1.2 Resetting the Unit
IMPORTANT: Before you start you should reset the unit. This will
reinstate the preset programmes.
To do this:
• move slide switch to SET TIME
position.
• using something non-metallic
(i.e a matchstick) press into the
small hole as shown opposite.
Slider switch Rocker switches
and +1
HOUR button
and
ADVANCE button
RESET
To Next Page
Loading...
