Danfoss TP5000 si range User Manual

31
Settings Reference
Note to installers:
Please use this table to record changes to default settings.
Installer Settings
Option Description Installer Set Value
30 Set upper limit of temperature range
31 Set lower limit of temperature range
32 Enable O at lower limit
33 Enable On at upper limit
34 Select On/O or Chrono-proportional
35 Set Integration Time
36 Set temperature override rule
37 Set time duration of override rule
38 Relay state on low battery detect
(battery products only)
40 Number of events per day
41 Operating mode (5/2 day or 24 hour)
70 Keyboard disable rules
71 Random start rules (24V/230V only)
72 Owner site reference number
73 Owner thermostat reference number
74 Date format for calendar clock
81 Thermostat calibration bias
90 De ne remote sensor type (“A” models only)
93 Set limit sensor set-point (“A” models only)
94 Con gure digital input switch (“A” models only)
User Settings
Option Description Installer Set Value
1 Enable or disable A/B programming
3 Calendar Clock Rules
4 Time zone o set
10 Frost/Thermostat mode setting
11 Start-up method
12 Optimum start control pre-heat setting
13 Optimum start control/Delayed start event
setting
Settings Reference
GB

Danfoss TP5000 si range Specifications

General

Brand	Danfoss
Model	TP5000 si range
Category	Thermostat
Language	English