Danfoss VLT 2800 User Manual

Speed PID 100
Speed regulation 97
Speed up/down 55
Square root 105
Start 104
Start delay 71
Start frequency 73
Start function 71
Start torque 71
Start voltage 74
Start/stop 55
Stator reactance 70
Stator resistance 69
Status word 2
Status Word 2
STOP/RESET 29
Sub D plug 54
Sum 82
Switches 1-4 54
Switching frequency 96
Switching on the input 2
T
Telegram Profile 125
Telegram Structure 111
Telegram Traffic 111
Temperature-dependent switch frequency 2
Terminal 42 90
Terminal 46 92
Terminal 53 88
Terminal 60 88
Terminal cover 38
Terminals 55
The differentiator 98
Thermal motor protection 72
Thermistor 73
Thermistor 87
Tightening Torque, Power Terminals 1
Time out 89
Torque characteristic 67
U
U/f-ratio 74
UL Standard 2
V
Variable torque 67
Vibration and shock 2
W
Warning words, extended status words and
Alarmwords
3
Warnings/alarm messages 3
166 MG.27.E2.02 - VLT is a registered Danfoss trademark

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage