Danfoss VLT 2800 User Manual

3,7 kW VLT 2840 PD2 1 x 220-240 V / 3 x 200-240 V
RFI
Unit
Profibus DP
1)
3 MBits/s
DeviceNet Ordering no.
- ST - - 178F5170
- ST
✓
- 178F5171
-ST -
✓
178F5172
3,7 kW VLT 2840 3 x 200-240 V
RFI
Unit
Profibus DP
1)
3 MBits/s
DeviceNet Ordering no.
- ST - - 195N0073
- SB - - 195N0074
R1 ST - - 195N0075
R1 SB - - 195N0076
- ST
✓
- 195N0077
- SB
✓
- 195N0078
R1 ST
✓
- 195N0079
R1 SB
✓
- 195N0080
- ST -
✓
195N0081
- SB -
✓
195N0082
R1 ST -
✓
195N0083
R1 SB -
✓
195N0084
ST: Standard unit.
SB: Standard unit with integral brake.
R1: With RFI filter that complies with EN 55011-1A.
NB!
For VLT 2803-2815 with an R1 filter it is
only possible to connect single-phase
mains voltage 1 x 220 - 240 Volt.
1) Also available in 12 MBit/s version.
MG.27.E2.02 - VLT is a registered Danfoss trademark 17
Introduction to VLT 2800

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage