Danfoss VLT AutomationDrive FC 300 Instruction Manual

Index
A
Abbreviations 1-3
Access To Control Terminals 3-20
Activate Brake Delay 2-23 4-13
[Activate Brake Speed Hz] 2-22 4-13
[Activate Brake Speed Rpm] 2-21 4-13
Alarm Messages 6-1
Ama 3-27
Analog Inputs 5-2
Analog Output 5-3
Approvals 1-2
Automatic Motor Adaptation (ama) 3-27, 4-5
B
Brake Check 2-15 4-11
Brake Control 6-5
Brake Function 2-10 4-10
Brake Power Limit (kw) 2-12 4-10
Brake Power Monitoring 2-13 4-11
Brake Release Time 2-25 4-13
Brake Resistor (ohm) 2-11 4-10
C
Cable Lengths And Cross-sections 5-4
Cable Lengths And Cross-sections Continued 5-4
Catch Up 4-20
Checklist 3-1
Communication Option 6-6
Connection To Line Power 3-9
Control Cables 3-24
Control Card Performance 5-4
Control Card, +10 V Dc Output 5-3
Control Card, 24 V Dc Output 5-3
Control Card, Rs-485 Serial Communication 5-3
Control Card, Usb Serial Communication 5-4
Control Characteristics 5-4
Control Terminals 3-21
Cooling 4-8
Cooling Conditions 3-5
D
Dc Backup 1-2
Dc Link 6-5
Decoupling Plate 3-13
Default Settings 4-30
Devicenet 1-1
Digital I/o Mode 5-00 4-17
Digital Inputs: 5-1
Digital Output 5-3
Disposal Instructions 1-3
E
Electrical Installation 3-21, 3-24
Electrical Terminals 3-24
Electronic Terminal Relay 4-9
Etr 6-5
VLT
®
AutomationDrive FC 300 Instruction
Manual
Index
MG.33.AG.22 - VLT
®
is a registered Danfoss trademark 7-1

Danfoss VLT AutomationDrive FC 300 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300
Category	DC Drives
Language	English