Danfoss VLT AutomationDrive FC 300 Instruction Manual

Parameters for the adjustable frequency drive are grouped into various parameter groups for easy selection of the correct parameters for optimized
operation of the adjustable frequency drive.
0-** Operation and display parameters for basic adjustable frequency drive settings
1-** Load and motor parameters, includes all load and motor related parameters
2-** Brake parameters
3-** References and ramping parameters, includes DigiPot function
4-** Limits/warnings, setting of limits and warning parameters
5-** Digital inputs and outputs, includes relay controls
6-** Analog inputs and outputs
7-** Controls, setting parameters for speed and process controls
8-** Communication and option parameters, setting of Adjustable Frequency Drive RS485 and Adjustable Frequency Drive USB port parameters.
9-** Profibus parameters
10-** DeviceNet and CAN serial communication bus parameters
13-** Smart Logic Control parameters
14-** Special function parameters
15-** Drive information parameters
16-** Readout parameters
17-** Encoder Option parameters
32-** MCO 305 Basic parameters
33-** MCO 305 Advanced parameters
34-** MCO Data Readout parameters
VLT
®
AutomationDrive FC 300 Instruction
Manual
4 How to Program
MG.33.AG.22 - VLT
®
is a registered Danfoss trademark 4-31
4

Danfoss VLT AutomationDrive FC 300 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300
Category	DC Drives
Language	English