Danfoss VLT FC 100 Series User Manual

NB!
Please note that changes will affect par. 8-50 to 8-56.
Bit 6, Net Reference:
Bit 6 = "0" Reference is from the standard inputs.
Bit 6 = "1" Reference is from DeviceNet.
NB!
Please note that changes will affect parameters 3-15 to 3-17 Reference source X.
For the Speed reference, see section Bus Speed Reference Value under Instances 20/70 and
21/71
.
4. How to Control the Frequency Converter FC 100/ 200/ 300 DeviceNet
28 MG.33.D3.02 - VLT
®
is a registered Danfoss trademark
4

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English