Danfoss vlt fcd 302 - 2 Installation; Check List

2 Installation
2.1 Check List
The packaging contains:
•
Accessories
bag, supplied only
with order of
installation box. Contents:
2 cable clamps
bracket for motor/loads cables
elevation bracket for cable clamp
screw 4 mm 20 mm
thread forming 3.5 mm 8 mm
•
Documentation
•
Frequency converter
Depending on options fitted, the box will contain one or
two bags and one or more booklets.
•
When unpacking the frequency converter, ensure
that the unit is undamaged and complete
•
Compare model number of unit on the name
plate to what was ordered, to verify the proper
equipment.
•
Ensure the mains (power) supply, frequency
converter, and motor are rated for same voltage.
Installation
VLT
®
Decentral Drive FCD 302 Operating Instructions
MG04F302 - VLT
®
is a registered Danfoss trademark
9
2 2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com