Danfoss VLT - Page 134

Par. No. # Parameter description Default value
(SR = Size related)
4 set-up Change during oper-
ation
Conver-
sion index
Type
18-0* Maintenance Log 18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8 18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay 18-1* Fire Mode Log 18-10 Fire Mode Log: Event 0 N/A All set-ups FALSE 0 Uint8 18-11 Fire Mode Log: Time 0 s All set-ups FALSE 0 Uint32 18-12 Fire Mode Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay 18-3* Inputs & Outputs 18-30 Analog Input X42/1 0.000 N/A All set-ups FALSE -3 Int32 18-31 Analog Input X42/3 0.000 N/A All set-ups FALSE -3 Int32 18-32 Analog Input X42/5 0.000 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-35
Analog Out X42/11 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-5* Ref. & Feedb. 18-50 Sensorless Readout [unit] 0.000 SensorlessUnit All set-ups FALSE -3 Int32
6.2.17 18-** Info & Readouts
6 How to program the adjustable frequency
drive
VLT
®
HVAC Drive Instruction Manual
6-76 MG.11.A9.22 - VLT
®
is a registered Danfoss trademark
6