7.2 Acoustic noise or vibration
If the motor or the equipment driven by the motor, e.g., a fan blade, is
making noise or vibrations at certain frequencies, try the following:
• Speed Bypass, parameters 4-6*
• Overmodulation, parameter 14-03 set to off
• Switching pattern and frequency parameters 14-0*
• Resonance Dampening, parameter 1-64
VLT
®
HVAC Drive Instruction Manual 7 Troubleshooting
MG.11.A9.22 - VLT
®
is a registered Danfoss trademark
7-7
7
To Next Page
Loading...
