Need help?Do you have a question about the Danfoss VLTAutomationDrive FC 360 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Frequency Range | 0 - 400 Hz |
| Input Voltage | 380-480 V |
| Control Method | Vector control, V/f control |
| Communication Protocols | Modbus RTU, CANopen, Profibus DP |
| Operating Temperature | -10°C to +50°C |
| Output Voltage | 0 to Input Voltage |
| Protection Features | Overcurrent, overvoltage, undervoltage, short circuit, overtemperature |
| Ambient Temperature | -10 to +50 °C |
| Cooling Method | Fan cooled |
Explains the two modes for starting the frequency converter: Hand On and Auto On.
Procedure for measuring motor characteristics to optimize converter compatibility and performance.
Guidance on selecting the optimal site and considerations for physical installation of the unit.
Detailed instructions for wiring the frequency converter, including mains, motor, and control connections.
Methods and steps for programming the frequency converter using the Local Control Panel (NLCP).
Navigating and accessing all parameters through the Main Menu structure.
Classification of different types of warnings and alarms issued by the converter.
Detailed definitions of specific warning and alarm codes and their causes.
To Next Page