Danfoss VLTAutomationDrive FC 360 User Manual

4.2 Quick Menu
The Quick Menu gives easy access to the most frequently
used parameters.
1. To enter the Quick Menu, press [Menu] key until
indicator in display is placed above Quick Menu.
2.
Use [
▲
] [
▼
] to select either QM1 or QM2, then
press [OK].
3.
Use [
▲
] [
▼
] to browse through the parameters in
the Quick Menu.
4. Press [OK] to select a parameter.
5.
Use [
▲
] [
▼
] to change the value of a parameter
setting.
6. Press [OK] to accept the change.
7. To exit, press either [Back] twice (or three times if
in QM” and QM3) to enter Status, or press [Menu]
once to enter Main Menu.
User Interface and Programm...
VLT
®
AutomationDrive FC 360 Quick Guide
20 MG06A102 - VLT
®
is a registered Danfoss trademark
44

Danfoss VLTAutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLTAutomationDrive FC 360
Category	Controller
Language	English