MAGNET POWER SUPPLY SYSTEM 9100
7
DANFYSIK A/S - DENMARK.
Current readback resolution: 16 bit ADC
Voltage readback resolution: 16 bit ADC
Current control range (setting range): 1 – 100%
Ramp speed (0 – 100%): 0.1 – 10 s (adjustable)*
Current loop bandwidth: 2 – 100 Hz
Voltage loop bandwidth: >200 Hz
*Ramp speed for the bipolar version is limited in the second and fourth quadrant. See page 22.
CONTROL PANEL
Alphanumeric LCD display:
Preset output current, 6 digits [A]
Actual output current, 5 digits [A]
Output voltage, 2 digits [V]
Interlock status text string
Push buttons and LED's
OFF [Button]/[LED]
Reset (interlock) [Button]/[LED]
ON [Button]/[LED]
Menu [Button]
Out of regulation [LED]
Remote control / interfacing
RS232 as standard (RS422 and RS485, or SPI are available on request)
The following status messages are available via the remote control interface:
ON/OFF command
Reset command
ON/OFF status
Remote status
Output current
Output voltage
Ambient temperature
Delta temperature
Internal power supply 15 V
Internal power supply 5 V
I set value
V set value
The following controls are available via the analog control interface:
Set current
Set voltage
Output current readback
Output voltage readback
To Next Page
Loading...
