APP-control v10.x
8.1.1 Status
You can query the current status of the heater by sending a sms with the text
"INFO" to the APP-control.
BASIC, W-BUS
The status displays the state of the APP-control.
E-BUS
The E-BUS version communicates with the heater and can display the current
state of the heater.
8.1.2 Status messages
E-BUS only
Status messages are deactivated with the default settings.
When status messages are enabled, you will be notified via SMS either when:
• the heater was started successfully
• the heater could not be started
• the heater was turned off
10 - 32
To Next Page
Loading...