APP-control v10.x
16 Manufacturer
Ing. Büro Gornicki
Boizenburger Str. 30
D - 12619 Berlin
E-Mail: info@danhag.de
Webseite: www.danhag.de
17 technical data
Supply voltage: 10 - 15 VDC
Current consumption: Standby ca. 10mA, shortly max. 2A
Switching output 1: E-BUS
Switching output 2: +12V, max 1A
Operating temperature: -30°C bis 80°C
Dimensions: 64 x 60 x 22mm (L x B x H) zzgl. Antenne
18 Copyright
All brands and trademarks mentioned in this operation manual and possibly
protected by third parties are unlimitedly subject to the regulations of the
respectively valid trademark law of the respectively registered owners. The
bare mentioning does not allow the conclusion that brands are not protected
by rights of third persons. The brands and trademarks mentioned in this
operation manual are property of the respective copyright holder and are only
used descriptively.
Reproduction, copying and publication are allowed with written approval only.
(c) Ing. Büro Gornicki
29 - 32
To Next Page
Loading...