APP-control v10.x
14.2 Configuration with SMS configurator
Please use the SMS configurator on „www.danhag.de“ for the configuration.
Alternatively you can also generate and send the SMS with your mobile phone.
After successful configuration the GSM remote control will send an SMS with an
overview of the current settings to the master number.
14.3 Configuration with mobile phone
Each function and / or setting has an assigned number. The assignment of the
respective parameter is carried out by a „=“ sign. Close up each input with a
„;“. You can summarize several functions in one SMS (max. 150 digits). Finish
the configurations SMS with „#“.
Example SMS
The example SMS configures the GSM remote control as follows:
• Masternumber 1: 0305627853
• Phone number 2: 01706878981
• Running time: 25 minutes
Syntax:
12345;11=+49305627853;12=+491706878981;20=25;#
14.4 Delete a phone number
You can delete a phone number by overwriting it with "0".
14.5 Reset
To reset the APP-control, please disconnect the power supply for about 5 sec.
25 - 32
To Next Page
Loading...