APP-control E-BUS v10.x
8.3 Switching acknowledgment
8.3.1 Switching by call
When switching the APP-control by call, you will hear a dial tone. During this
time the caller's ID will be analyzed. In case of a valid phone number th
switching operation will be released and you will hear a busy tone.
8.3.2 Switching by APP or SMS
You can query the current switching state of the APP-control by sending a SMS
with the text “INFO” to the APP-control.
8.4 Status LED, GPS LED
Die LEDs zeigen den aktuellen Zustand des Gerätes und des GPS-Empfängers an.
Status LED
flashing green (every 3s) Standby (logged in)
lighting green Heater is switched on
flashing red Network search (not logged in)
lighting red fault
GPS LED
off GPS-receiver off
flashing red (every 1s) no GPS-reception
To Next Page
Loading...