APP-control v10.x
Ignition ON
You can query the position via SMS “GPS”.
If the ignition is switched on the position is determined about every 1 second. If
The Ignition is switched off, you will get the last known position.
Ignition OFF
You can query the current position via SMS “XGPS”.
The GSP-receiver is activated for about 3 minutes to determine the position.
19 - 32
The GPS-receiver must be activated when used for the first
time. Please refer to the manual delivered with the GPS-
receiver.
If you want to update the position when the ignition is
turned off, you will have to send a SMS with the text
„XGPS“ to the APP-control. The GPS-receiver is turned on
for about 3 minutes and determines the current position.
If the receiver doesn't get any valid information, the last
known position will be used.
The „E-BUS“ version determines the current state of the
ignition via the vehicles data-bus. You will not have to
connect the ignition separately.
To Next Page
Loading...