10.2.2.6 Max delegate speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> "1" to "8"
10.2.2.7 Max requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> "0" to "250".
10.2.2.8 Operation mode
mic_mode <mode><CR>
System operation mode.
<mode> "auto" (Automatic), "fifo" (First-in-first-out), "manual" (Manual) and "vox" (Voice Active)
10.2.2.9 Interrupt mode
mic_interrupt <mode><CR>
Ability for microphones to interrupt.
<mode> "on" (microphones interrupt) and "off" (microphones do not interrupt)
10.2.2.10 Seat Number
seat_number <seat number> <seat state> <seat name><CR>
Seat information.
This information is sent from the CU to an External Control, when the External Control requests microphone status
(mic_status).
<seat number> The seat number identification of a Conference unit. An integer ranging from 1 to 65535.
<seat state> The current state of the seat. This can be “active” or “passive”
<seat name> Name assigned to a Conference unit via the Browser interface.
Example:
seat_number 12 active John Jones<CR>
This command informs about seat number 12, which is active and has the name ‘John Jones’ attached.
To Next Page
Loading...