3 Your DCS 6000 Conference System
3.1 The DCS 6000 system with CU 6105
DCS 6000 Digital Conference System is a system to be
used at meetings, where a number of people are
addressing the ‘Floor’ in a structured manor. The
audio from the Conference units can be heard in the
built in loudspeakers in the units.
The system does also allow for simultaneous
interpretation for international conferences where
multiple languages are used.
To enable all participants to understand the
proceedings, interpreters can simultaneously
translate the speaker’s language as required. These
interpretations are distributed through the connected
Conference units and delegates can select the
language of their choice and listen to it through
headphones.
DCS 6000 Digital Conference System comprises of one
CU 6105 Central Unit and a number of Conference
Units, Gooseneck Microphones and other accessories
depending on the system configuration.
The DCS 6000 system used with CU 6105 has the
following main features:
• Fully digital
• Excellent sound quality
• “State of the Art” fully digital integrated
interpretation, discussion and voting system
offering interpretation, language distribution,
conference microphone and voting facilities with
attendance check with Chip Card ™
• Digital transmission of audio from/to the
Conference unit to/from the central unit using a
unique digital DATA and AUDIO bus named DCS-
LAN
• Control of up to 500 conference units. This
number does not include Channel Selectors,
Repeaters etc. In practical use there are no limits
for the number of Channel Selectors in a system
• Delegate and Interpreter units are powered and
controlled by the CU 6105 Central Unit, which
drives up to app. 50 units with the CU power
supply
• EX 6010 Extension Unit or PS 6000 Power
Supplies is available if more units are required
• Delayed switching on of power to the two chains,
to minimize the total ‘in-rush’ current on the
Mains supply
• Designed for 16 interpreted channels and 8 open
microphones
• Audio scrambling of the audio to avoid
eavesdropping
• Designed in a standard 1HE 19” cabinet
• TCP/IP connection on CU 6105 for external
operation of the system using a PC or control
system such as AMX ® or Crestron ®
• Functionality on the CU 6105 depends on the
Feature License uploaded into the unit
• Firmware in Delegate units, Interpreter Units,
Central Units etc. is upgradeable
• Operated either stand alone or from a PC using
the CU browser or using SW 6000 software
• Added functionality and comprehensive features
provided by SW 6000 software package running
on PC
The SW 6000 is an optional software package, which
expands the functionality of the DCS 6000 system.
The software runs on standard computer technology
(Standard PC with Windows 7, Server 2008 etc.).
Main features of the SW 6000 are:
• Microphone management
• Mimic panel operation
• Interpretation management
• Voting management
• Message handling
To Next Page
Loading...