Dantherm Vent R2 - Reading the Actual Conditions; Reading Technical Data

STXC2 User’s guide
Version 2.0
21 of 30
Here the actual values for the ventilation are indicated:
Supply air % / Return air %
Output voltage (control signal) to the fan motors.
0% = 0V and 100% = 10V.
Supply press Pa / Return press Pa
The measured differential pressure across the fans. The value is used for calculating the air volume.
Supply m3h / Return m3h
The air volume being produced by the fans.
2.9 Reading technical data.
In the main menu the sub menu Technical data is selected:
When the sub menu Sensor inputs is selected:
Here the actual values for temperatures, humidity, external fan speed override, temperature
displacement and differential pressure across the fans are indicated.
Main menu Monday 12:21
Technical data
Sensor inputs
Control outputs
On/off inputs
Function switch
On/off outputs
Override set points
Filter configuration
Processor
STIO Data
Language
Main menu Monday 12:21
Supply sensor C +21,7
Return sensor C +20,3
Ambient sensor C +24,3
Preheat sensor C None
Fan override % 000
Humidity % 062
Temp.displacement -2,3
Supply press Pa 1280
Return press Pa 1262
Technical data
Sensor inputs