19 CLM Laminator
CLM Laminator Quick Install and Upgrade Guide
10. Verify the Test Card
Examine the test card to verify the following:
• The overlays are applied properly:
• Each overlay is applied completely to the card.
• The material adheres well to the edges of the card.
• The overlay does not come off when the card is
bent or twisted.
• The card is debowed correctly.
• The impression is positioned correctly and has the
proper depth.
If you need to adjust the laminator settings, refer to the
“Printer Manager” section of the printer’s Installation and
Administrator’s Guide.
Warning: This product contains chemicals, including lead,
known to the State of California to cause cancer, and birth
defects or other reproductive harm. Wash hands after handling.
For more information on this warning, refer to www.datacard.com/
califpropwarning.
To Next Page
Loading...
