DataCard CR805 Product Guide

Page 12 of 15
Entrust Datacard Confidential
 Locks
 Easy to install in the field Magnetic stripe and smart card field upgrade kits. No tools are required.
Special note: When upgrading an existing card printer, completely new upgrade kit must be
orders to replace existing kit. For example, if existing printer contains magstripe encoder, and
end customer wants to upgrade to smartcard encoder, then they must order an upgrade kit that
has both.
UPGRADE KITS
When ordering an upgrade kit, a model serial number will be requested.
513088-002
Upgrade Kit, ISO Magnetic Stripe
513088-003
Upgrade Kit, JIS Magnetic Stripe
513090-001
Upgrade Kit, DUALi Single Wire Contact/Contactless Encoder, ISO 7816, ISO 14443, Mifare,
Desfire & Felica
513090-002
Upgrade Kit, ISO Magnetic Stripe, DUALi Single Wire Contact/Contactless Encoder, ISO
7816, ISO 14443, Mifare, Desfire & Felica
513090-003
Upgrade Kit, JIS Magnetic Stripe, DUALi Single Wire Contact/Contactless Encoder, ISO
7816, ISO 14443, Mifare, Desfire & Felica
513092-001
Upgrade Kit, Loosely Coupled Identive Smart Card Contact/Contactless Reader/Encoder
513092-002
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled Identive Smart Card Contact/Contactless
Reader/Encoder
513092-003
Upgrade Kit, JIS Magnetic Stripe, Loosely Coupled Identive Smart Card Contact/Contactless
Reader/Encoder
513265-001
Upgrade Kit, Loosely Coupled, pcProx Plus ID Contactless Smart Card Encoder (Read Only)
513265-002
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled, pcProx Plus ID Contactless Smart Card
Encoder (Read Only)
513266-001
Upgrade Kit, Loosely Coupled, iCLASS by HID Contactless Smart Card Encoder (Read-
Write)
513266-002
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled, iCLASS by HID Contactless Smart Card
Encoder (Read-Write)
FREQUENTLY ASKED QUESTIONS
GENERAL
Q. What is the print speed of the Entrust Datacard® CR805 Retransfer Printer?
A. The print speed for the CR805 is:
 Up to 100 cards per hour front side CMYKP ribbon
 Up to 66 cards per hour front side CMYKP-KP ribbon (back side K)
Q: What standards does the magnetic stripe encoder support?
A: The magnetic stripe encoder supports ISO 7811 standards and high- and low-coercivity.1, 2 or
3 track encoding and JIS encoding.
Q: What encoding protocols are supported by the smart card encoder?
A: The encoder supports ISO 14443 A/B and ISO 7816 protocols.
Q. Is the CR805 printer field upgradeable?

DataCard CR805 Specifications

General

Brand	DataCard
Model	CR805
Category	Printer
Language	English