Instrument Calibration
Overview
The instrument must be calibrated regularly to ensure that the measurements are accurate. This
section provides instructions for installing the calibration data and performing the calibration.
Installing Calibration Data
You will need to install the calibration data if this is a new system, or if you have received a new white
tile. The calibration data can be found on a diskette and a CD, both of which are included with the
calibration tiles.
NOTE
The data is provided on both diskette and CD to accommodate all system types. You will only
load it from one of the media.
Installing Data for Paintmaker Program
NOTE
White Tile Data Updates: Start from #1 below.
First time Installation: Go to step #3 below.
1. Insert the Paintmaker CD into the drive. The window below appears:
Datacolor 110 User's Guide Overview • 19
To Next Page
Loading...
Need help?
General