DATAEAGLE 4000 Series - Commissioning; Delivery State of the Modules

6 Commissioning
6 Commissioning
WARNING!
Risk of burns
Loosening or making electrical connections during operation is prohibited!
In case of non-observance, there is a risk of electric arcs which can lead to
burns.
→ Disconnect the module from the power supply.
CAUTION!
Uncontrolled processes
Material damage and personal injury due to incorrectly performed
commissioning phases (e.g. initial commissioning, recommissioning and in
the event of changes to the configuration).
Always carry out commissioning in this order:
1. insert module
2. have the system checked and approved by a qualified person
3. commission
ATTENTION
Dysfunctions in the living area
The devices of EMC class A can cause disturbances in the living area.
→ The operator must take appropriate measures.
6.1 Delivery state of the modules
NOTE
New devices are preconfigured at the factory.
In the delivery state, the units are configured as a radio network. The
Ethernet participants/connections that are connected after the radio link are
automatically detected.
Manual
DATAEAGLE 4000 Series - Wireless ETHERNET
27