2 For your safety
2 For your safety
→ Read this chapter carefully.
→ Only then work with the DATAEAGLE module.
2.1 General safety instructions
ATTENTION!
High electrical voltage in the machine / plant.
Death or serious injury due to electric shock.
→When working on the machine / modules, observe the five safety rules of
electrical engineering.
Protection of persons and property
→ According to DIN VDE 0105-100 - Operation of electrical installations - Part
100: General requirements
The five safety rules
Protect from high electrical voltage
1. unlocking
2. securing against reconnection
3. establishing absence of voltage on all poles
4. grounding and short-circuiting
5. covering or isolating adjacent live parts
Qualified personnel
The module may only be installed, commissioned and operated by qualified
personnel who have been instructed in safety technology.
You are knowledgeable if you meet the following conditions:
• have a suitable electrotechnical training.
• have been instructed by the machine operator in the operation of the
equipment and the valid safety regulations
• have access to the operating instructions and the manual
• are familiar with the safety standards of automation technology
• are familiar with the basic and technical standards applicable to the
specific application
Use of the module
• Observe all regulations on safety and accident prevention during project
planning, installation, commissioning, operation and testing of the module.
• When using aggressive medium, check the material resistance.
Manual
DATAEAGLE 4000 Series - Wireless ETHERNET
8
To Next Page
Loading...