Datakom DKG-329 - Default Chapter; Table of Contents

DKG-329 User Manual V-12 (09.10.2012)
- 2 -
Section
1. INSTALLATION
1.1. Introduction to the Control Panel
1.2. Mounting the Unit
1.3. Wiring the Unit
2. INPUTS AND OUTPUTS
3. DISPLAYS
3.1. Led Displays
3.2. Language Selection
3.3. Digital Display
4. ALARMS AND WARNINGS
5. MODES OF OPERATION
6. LOAD TRANSFER MODES
6.1. Transfer with Interruption
6.2. No Break Transfer
7.OTHER FEATURES
7.1. Remote start operation
7.2. Mains Simulation (Disable Start)
7.3. Delayed Mains Simulation, Battery Charging
7.4. Service Request Display
7.5. Engine Hours Meter
7.6. Date-Time Display
7.7. Display of Software Version
7.8. Modem connection
7.9. SMS message sending
7.10. Remote Monitoring and Programming
7.11. External Control of the Unit
7.12. Automatic Exerciser
7.13. Resuming to factory set parameters
7.14. Load Shedding / Dummy Load
7.15. Firmware Update
7.16. Pre-Transfer Signal
8. MODBUS COMMUNICATION
9. WEEKLY OPERATION SCHEDULE
10. EVENT LOGGING
11. STATISTICAL COUNTERS
12. MAINTENANCE
13. PROGRAMMING
14. TROUBLESHOOTING
15. DECLARATION OF CONFORMITY
16. TECHNICAL SPECIFICATIONS
17. CONNECTION DIAGRAM
TABLE OF CONTENTS