Step 6: Press the [CONTINUE] button and then enter in the
current password, which is 000000. Please follow the
onscreen instructions to set your new password. It is
recommended that you use a combination of both alpha
and numeric characters for your password.
Step 7: After the new password has
been set. You may set other options or
go back to the CONNECT menu by
pressing the button located at the
top left hand corner next to SETUP.
Then press the [CONNECT] button to
start using your DL3™ drive.
WARNING: A lost or forgotten password cannot be reset or recovered without
losing all of the stored data.
To Next Page
Loading...
