Datalogic BC9180-STAR - BC9180 System Defaults and Compatibility

Selecting the Interface
Quick Reference Guide 19
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If you aren’t sure
what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the
Standard Product
Default Settings
bar code below to copy the factory configuration for the cur-
rently active interface to the current configuration.
To change the defaults refer to the PowerScan
™
9X00 PRG, or to the Datalogic
Aladdin
™
Configuration program, both downloadable from the Datalogic web-
site.
Compatibility with the PowerScan™ 8000 family
The BC9180 can be programmed to operate in a mode compatible with the
PowerScan
™
8000 family. For further details and for the relevant configuration
strings and labels, refer to the PRG.
Factory defaults are based on the interface type. Configure the
reader for the correct interface before scanning this label.
CAUTION
Scanning this bar code will RESET all settings for the PowerScan
™
PM9X00. Any customized settings that may have been applied to
the reader will be lost.
Standard Product Default Settings