Datalogic Gryphon GBT4200 - I 2 of 5 Check Character Calculation; I 2 of 5 Enable;Disable

ENTER/EXIT PROGRAMMING MODE SYMBOLOGIES
146 GRYPHON™ I GD/GBT/GM4200
I 2 of 5 Enable/Disable
When disabled, the scanner will not read I 2 of 5 bar codes.
I 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional I 2 of 5 check
character.
$CI2EN00

I 2 of 5 = Disable
I 2 of 5 = Enable
$CI2EN01
$CI2CC00

I 2 of 5 Check Character Calculation = Disable
I 2 of 5 Check Character Calculation
= Calculate Std Check (Modulo 10 no AR)
$CI2CC01
$CI2CC02
I 2 of 5 Check Character Calculation
= Calculate German Parcel Check
I 2 of 5 Check Character Calculation
= Calculate DHL Check
$CI2CC04
$CI2CC08
I 2 of 5 Check Character Calculation
= Calculate Daimler Chrysler Check