Datalogic Gryphon L GD4300 User Manual (English)

Other manuals for Datalogic Gryphon L GD4300

Questions and Answers:

D
Dr. Nathan ThomasAug 11, 2025
Why Datalogic Gryphon L GD4300 laser comes on, but barcode does not decode?
- D
  Donald HaleyAug 11, 2025
  If your Datalogic Barcode Reader's laser activates but fails to decode the barcode, there might be a few reasons: * The reader may not be set up for the barcode type you're scanning. Check the Product Reference Guide (PRG) for programming instructions. * The barcode itself could be damaged or unreadable. Make sure the label is clean and try scanning a different barcode. * The distance between the reader and the barcode might be off. Try moving the reader closer or further away from the barcode.
F
fyangAug 20, 2025
What to do if Datalogic Barcode Reader decodes but not transmitted to the host?
- X
  xmeyerAug 21, 2025
  If your Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, it might not be programmed for the correct host type. Scan the appropriate host type barcode, referring to the Product Reference Guide (PRG) for more information.
M
Matthew GoldenAug 29, 2025
How to fix Datalogic Gryphon L GD4300 when nothing happens when the scan button is pulled?
- R
  Randall WilliamsonAug 29, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, it could be due to a couple of things: 1. There might be no power reaching the reader. Ensure the system power is on and the power supply is properly connected. 2. The interface or power cables could be loose. Make sure all cable connections are securely in place.