Datalogic Heron HD3130 - Ean 8; EAN 8 Enable;Disable; EAN 8 Check Character Transmission

Enter/Exit Programming Mode EAN 8
96 Heron™ HD3130
EAN 8
The following options apply to the EAN 8 (Jan 8) symbology.
EAN 8 Enable/Disable
When disabled, the scanner will not read EAN 8/JAN 8 bar codes.
EAN 8 = Disable
EAN 8 = Enable
DEFAULT
EAN 8 Check Character Transmission
Enable this option to transmit the check character along with EAN 8 bar code
data.
EAN 8 Check Character Transmission = Don’t Send
EAN 8 Check Character Transmission = Send
DEFAULT
$C8BEN00
$C8BEN01
$C8BCT00
$C8BCT01