Datalogic Heron HD3130 - Standard 2 of 5 Check Character Transmission; Standard 2 of 5 Minimum Reads

Symbologies Enter/Exit Programming Mode
Product Reference Guide 175
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check
character.
Standard 2 of 5 Check Character Transmission = Don’t Send
Standard 2 of 5 Check Character Transmission = Send
DEFAULT
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2
of 5 label must be decoded before it is accepted as good read.
Standard 2 of 5 Minimum Reads = 1
Standard 2 of 5 Minimum Reads = 2
DEFAULT
Standard 2 of 5 Minimum Reads = 3
Standard 2 of 5 Minimum Reads = 4
$CS2CT00
$CS2CT01
$CS2MR01
$CS2MR02
$CS2MR03
$CS2MR04