Datalogic Lynx 00N0LD-1N0-MEN0 User Manual

DataMatrix
Code
Parameter
Description
I.D.#
Accept.
Input
Defaults
Scanner
Type
Min
Max
Factory
2D Imager
Enter 1 for On and 0 for Off
Datamatrix
Enable
Enables/ disables the
Datamatrix symbology.
0B00 On or Off Off On On √
Datamatrix
Minimum
Set the minimum bar code
label length to be less
than or equal to maximum
label length.
0B20 1-1500 1 1500 1 √
Datamatrix
Maximum
This feature specifies the
maximum allowable length
of a label. The length
includes check and data
characters, if applicable.
Maximum Label Length
should be greater than or
equal to Minimum Label
Length.
0B21 1-1500 1 1500 1500 √
Datamatrix
User
Code ID
Specifies the symbology
identifier (if any) that is
sent when parameter
Send Code ID (Index
0025) is set to 3. ASCII
code zero (null) is used to
indicate that an identifier
is not to be sent for the
symbology.
0B23
Any
single
ASCII
character
(00 = Off)
‘V’ ‘V’ ‘V’ √

Datalogic Lynx 00N0LD-1N0-MEN0 Specifications

General

Brand	Datalogic
Model	Lynx 00N0LD-1N0-MEN0
Category	PDA
Language	English