Datalogic Lynx 00N0LD-1N0-MEN0 User Manual

3
1.2 REPLACING THE BATTERY PACK
To correctly replace the battery pack, proceed as follows.
1. Turn off the Lynx.
2. Shift the battery latch to the left and remove the battery pack:
3. Install the new battery pack, first insert the bottom (contacts) and then the
upper side of the battery pack into the slot. Press until the battery latch
clicks.

Datalogic Lynx 00N0LD-1N0-MEN0 Specifications

General

Brand	Datalogic
Model	Lynx 00N0LD-1N0-MEN0
Category	PDA
Language	English