Datalogic Matrix 400 - Software Features

MATRIX 400™ REFERENCE MANUAL
126
11
SOFTWARE FEATURES
Readable Code Symbologies
1-D and stacked 2-D POSTAL
 PDF417 Standard and Micro PDF417
 Code 128 (EAN 128)
 Data Matrix ECC 200
(Standard and Direct Marking)
 Australia Post
 Royal Mail 4 State Customer
 Code 39 (Standard and Full ASCII)
 Interleaved 2 of 5
 QR Code
(Standard and Direct Marking)
 Kix Code
 Japan Post
 Codabar  MAXICODE  PLANET
 Code 93  Aztec Code  POSTNET
 Pharmacode
 EAN-8/13 - UPC-A/E
(including Addon 2 and Addon 5)
 GS1 DataBar (RSS) Family
 Composite Symbologies
 Microglyph
(this symbology requires an
activation procedure – contact your
local Datalogic Automation
distributor for details)
 POSTNET (+BB)
 Intelligent Mail
Operating Mode ONE SHOT, CONTINUOUS, PHASE MODE
Configuration Methods
X-PRESS™ Human Machine Interface
Windows-based SW (VisiSet™) via serial or Ethernet link
Serial Host Mode Programming sequences
Parameter Storage Permanent memory (Flash)
CODE QUALITY VERIFICATION
Standard Supported Symbologies
ISO/IEC 16022 Data Matrix ECC 200
ISO/IEC 18004 QR Code
ISO/IEC 15415 Data Matrix ECC 200, QR Code
ISO/IEC 15416 Code 128, Code 39, Interleaved 2 of 5, Codabar, Code 93, EAN-8/13, UPC-A/E
AS9132A Data Matrix ECC 200
AIM DPM Data Matrix ECC 200, QR Code
USER INTERFACE
LED Indicators Power, Ready, Good; Trigger; Com, Status, (Ethernet Network); (Green Spot)
Keypad Button Configurable via VisiSet™