Cleaning Procedure
QUICK REFERENCE GUIDE
23
CLEANING PROCEDURE
Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom-
mended for use on Datalogic Disinfectant-Ready Enclo-
sures.
CAUTION: Do not use abrasive pads or cleaning
agents.
CAUTION: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.
PRODUCT CHEMICAL CONTENT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Quaternary Ammonium Chloride
solution
Hepacide Quat II Virucidal disinfectant cleaner
Alcohol Wipes 70% Isopropyl Alcohol
CaviWipes™
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
Virex® 256
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl
Ammonium Chloride
Formula 409® Glass and
Surface Cleaner
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol
Windex® Blue lsopropyl Alcohol
Clorox® Bleach;
Clorox Healthcare Bleach
Germicidal Cleaner
Sodium Hypochlorite;
Sodium Hydroxide
Hydrogen Peroxide 3%
ProSpray™ Wipes
(Disinfectant towelettes}
0.647% o-phenylphenol;
0.070% o-benzyl-p-chlorophenol
100% Gentle dish soap
and water
To Next Page
Loading...
Need help?
General
