User’s Guide 3
Unpack and Inspect Your Scanner
After unpacking your new scanner, check the contents of the shipping
carton to ensure all the items you ordered are included:
• PowerScan
®
RF handheld scanner
• Battery Pack(s)
• User’s Guide (this manual)
• Optional Accessories that you ordered. (The scanner can be
purchased with or without accessory kits.)
If your package contains wrong or missing components, contact your
place of purchase. If there are damaged components, immediately file a
claim with the carrier. You may want to save your packing material in
case you need to ship the scanner at some later time.
References
For more information about this product, its associated publications,
software, and accessories, visit our website listed on the back cover of
this manual.
Quick Start Instructions
The basic steps below must be performed to set up the RF scanner.
Each of these steps is detailed in this manual.
• Installing the Battery
• Verifying Scanner Operation
• Connecting the Base Station to the Host Terminal
• Linking the Scanner to a Base Station
• Verifying Scanner-to-Base Station Communications
To Next Page
Loading...
Need help?
General
