Need help?Do you have a question about the Datalogic PowerScan M8300 Readers and is the answer not in the manual?
General| Scanner Type | Laser |
|---|---|
| Sealing | IP65 |
| Operating Temperature | -20 to 50 °C / -4 to 122 °F |
| Type | Handheld |
| IP Rating | IP65 |
| Communication Range | Up to 100 m / 328 ft |
| Battery Type | Lithium-Ion |
| Drop Resistance | 2.0 m / 6.6 ft onto concrete |
| Connectivity | Bluetooth, USB |
| Radio Frequency System | Datalogic STAR Cordless System |
| Decode Capability | 1D / Linear Codes |
| Interface | RS-232 / USB / Keyboard Wedge |
| Scan Rate | 35 +/- 5 scans/sec |
| Supported Barcodes | All standard 1D codes including GS1 DataBar |
| Storage Temperature | -30°C to 70°C |
| Humidity | 5 - 95% (Non-condensing) |
| Drop Specification | Withstands repeated drops from 2.0 m / 6.6 ft onto concrete |
Explains how to position the scan line correctly for optimal barcode reading.
Details the correct reader tilt angle for successful scanning and avoiding reflections.
Steps to configure the reader for point-to-point applications with a BC-80X0 cradle.
Instructions for setting up the reader in a stand-alone mode with a BC-80X0 cradle.
Procedure for configuring the reader to communicate with STAR-System™ devices.
Detailed steps for a rapid point-to-point configuration using the BC-80X0 base station.
Details the product warranty coverage, duration, and limitations.
Outlines the procedure for obtaining warranty service, including RMA requirements.
Details FCC compliance statements and rules for the device.
Information on radio compliance and relevant authorities.
States compliance with laser safety standards and provides warnings.
To Next Page