EasyManuals Logo

Datalogic PowerScan M8300 Readers User Manual

Datalogic PowerScan M8300 Readers
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Charging the Batteries
Quick Reference Guide 5
BATTERY SAFETY
To install, charge and/or perform any other action on the battery, follow the
instructions in this manual.
WARNING
Do not discharge the battery using any device except for the scanner.
When the battery is used in devices other than the designated product, it
may damage the battery or reduce its life expectancy. If the device causes
an abnormal current to flow, it may cause the battery to become hot,
explode or ignite and cause serious injury.
Lithium-ion battery packs may get hot, explode or ignite and cause seri-
ous injury if exposed to abusive conditions. Be sure to follow the safety
warnings listed on this and the following page.
Do not place the battery pack in fire or heat.
Do not connect the positive terminal and negative terminal of the bat-
tery pack to each other with any metal object (such as wire).
Do not carry or store the battery pack together with metal objects.
Do not pierce the battery pack with nails, strike it with a hammer, step
on it or otherwise subject it to strong impacts or shocks.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids, or allow the battery to get
wet.
Do not apply voltages to the battery pack contacts.
WARNING
In the event the battery pack leaks and the fluid gets into your eye, do not
rub the eye. Rinse well with water and immediately seek medical care. If
left untreated, the battery fluid could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.
Use only the authorized power supplies, battery pack, chargers, and
docks supplied by your Datalogic reseller. The use of any other power sup-
plies can damage the device and void your warranty.
Do not disassemble or modify the battery. The battery contains safety and
protection devices, which, if damaged, may cause the battery to generate
heat, explode or ignite.
CAUTION
Do not place the battery in or near fire, on stoves or other high tempera-
ture locations.
Do not place the battery in direct sunlight, or use or store the battery
inside cars in hot weather. Doing so may cause the battery to generate
heat, explode or ignite. Using the battery in this manner may also result in
a loss of performance and a shortened life expectancy.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan M8300 Readers and is the answer not in the manual?

Datalogic PowerScan M8300 Readers Specifications

General IconGeneral
Scanner TypeLaser
SealingIP65
Operating Temperature-20 to 50 °C / -4 to 122 °F
TypeHandheld
IP RatingIP65
Communication RangeUp to 100 m / 328 ft
Battery TypeLithium-Ion
Drop Resistance2.0 m / 6.6 ft onto concrete
ConnectivityBluetooth, USB
Radio Frequency SystemDatalogic STAR Cordless System
Decode Capability1D / Linear Codes
InterfaceRS-232 / USB / Keyboard Wedge
Scan Rate35 +/- 5 scans/sec
Supported BarcodesAll standard 1D codes including GS1 DataBar
Storage Temperature-30°C to 70°C
Humidity5 - 95% (Non-condensing)
Drop SpecificationWithstands repeated drops from 2.0 m / 6.6 ft onto concrete

Related product manuals