Datalogic PowerScan M8300 Readers User Manual

Compliance
Quick Reference Guide 21
laser beam hits the eye of an observer, even through reflective surfaces such as
mirrors, etc.
The following information is shown on the laser scanner device class label:
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
IC (INDUSTRY CANADA)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
POWER SUPPLY
ITALIANO
Classe 2:
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI
CLASSE 2
DEUTSCH
Klasse 2:
LASERSTRAHLUNG
NICHT IN DEN STRAHL
PRODUKT DER LASERKLASSE 2
FRANÇAIS
Classe 2:
RAYON LASER
EVITER DE REGARDER LE
RAYON
APPAREIL LASER DE
CLASSE 2
ESPAÑOL
Clase 2:
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
Atencíon
Características de la
fuente de alimentación
eléctrica.
Entrada:
100 - 240 VCA
min 400 mA 50-60 Hz
Salida:
12VDC, máx 1500mA
(-)Negativo al centro
Utilice en su red solo fuentes certificadas en Argentina.
El uso de fuentes de alimentación no compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el usuario.

Datalogic PowerScan M8300 Readers Specifications

General

Scanner Type	Laser
Sealing	IP65
Operating Temperature	-20 to 50 °C / -4 to 122 °F
Type	Handheld
IP Rating	IP65
Communication Range	Up to 100 m / 328 ft
Battery Type	Lithium-Ion
Drop Resistance	2.0 m / 6.6 ft onto concrete
Connectivity	Bluetooth, USB
Radio Frequency System	Datalogic STAR Cordless System
Decode Capability	1D / Linear Codes
Interface	RS-232 / USB / Keyboard Wedge
Scan Rate	35 +/- 5 scans/sec
Supported Barcodes	All standard 1D codes including GS1 DataBar
Storage Temperature	-30°C to 70°C
Humidity	5 - 95% (Non-condensing)
Drop Specification	Withstands repeated drops from 2.0 m / 6.6 ft onto concrete