Datalogic QuickScan Lite QW2400 Quick Reference Guide

Operating Modes
Quick Reference Guide 25
Object Detection — The scanner looks for changes within
its field-of-view. The Aiming Pattern is always on to show
the optimum reading area. If a predefined amount of
movement is detected, the white illumination switches on.
Scanning continues until a label is read or "maximum scan
on time" is reached.
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
 Scan Mode = Trigger Single
Scan Mode = Trigger
Pulse Multiple
Scan Mode = Trigger
Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
 = default value

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)