Datalogic QuickScan QS2500 - Page 27

Product Reference Guide 23
4. Scan the Store Settings bar code on the inside back cover.
5. Repeat the same procedure for the G2 characters.
6. Scan the Exit bar code.
7. Insert the data group 1–4 position. (page
24.)
Option Bar Code Option
Alphanumeric
Entry
Prefix
None
00*
1–22 characters 00–ff
hex
ASCII code
Suffix
None 00
1–22 characters 00–ff
hex
ASCII code
<cr>*
Preamble
None
00*
1–22 characters 00–ff
hex
ASCII code
Postamble
None
00*
1–22 characters 00–ff
hex
ASCII code
Insert G1 Characters
Setting
None
00*
1–22 characters 00–ff
hex
ASCII code
$
Start Program