Datalogic Rhino II - Page 102

Datalogic Applications
96 Rhino™ II
6. Click the Back button (a leftward pointing arrow in a circle) to
return to the DXU main window).
Update Firmware
You can update the Rhino II’s firmware from DXU. DXU provides the
following options:
•a Silent Install where no user interaction is required on the
device;
•a Force Update where the firmware is reinstalled even if the
device reports that it already has the same version installed;
• a factory data reset or an enterprise reset can be performed
after updating the firmware;
• the update can simply reboot the device without performing an
update.
NOTE
DXU firmware update is not the only way to update the
firmware on the Rhino II. DXU’s firmware update
capability works only with connected devices. If you need
a method that can update firmware on many devices
remotely, especially if they are not connected to a
network, then other methods may suit your needs better.
Please consult your device’s user reference guide for
other firmware update methods.
NOTE
Customarily firmware update is referred to as "update" on
devices that use Microsoft Windows operating systems,
and it is referred to as "upgrade" on devices that use the
Android operating system. These terms are used because
the creators of these operating systems use these terms,
but the terms essentially mean the same thing.