Datalogic Applications
78 Rhino™ II
Open a Configuration File Which is Authenticated
DXU displays a login prompt when you open a configuration file that
requires authentication and when you connect to a device with a
password set in the DXU Agent.
To open a configuration or to connect to a device which requires
authentication:
1. Open a configuration file or load the configuration from a
connected device.
2. Type the user name for this configuration/device into the User
Name field.
3. Type the password for this configuration/device in the Password
field.
4. Click OK.
Edit a Configuration File Off-line
You can edit configuration files even when the device they were
drawn from are not connected to DXU. Follow the steps below:
1. Open your configuration file.
2. Edit any settings you wish.
3. Either save the result to a new configuration file, or just save to
the same configuration file.
To Next Page
Loading...