Datalogic Applications
User’s Manual 93
Unlock the Screen Using Remote Control
You can unlock the screen by dragging your mouse on the Remote
Control screen.
To start Remote Control and unlock a device’s screen:
1. Launch DXU.
2. Connect the device to DXU either directly using USB or through
the network via Wi-Fi or Ethernet, or scan a Scan2Deploy label.
3. Click the device button in the Available Device list.
4. Click the Remote Control.
5. If the device is suspended, press the Power button at the
bottom of the Remote Control window.
6. Click the lock icon and drag it rightward, releasing it over the
unlocked lock icon at the right edge of the Remote Control
window.
Save a Screenshot of Remote Device
At the bottom of the Remote Control window, the Save button takes
a screenshot of the remote computer and prompts to save it to your
PC. The default path is your user folder.
To Next Page
Loading...