Datamars ISO MAX V - Page 27

ISO MAX V Manual – v. 1.2 – july 2012 27
10.1.19 Sets the “store in memory” function
• Command syntax: “.SM#” [CR]
• Command answer: [LF]
• Command action: sets the “store in memory” function
• Parameter range: #= 0 or 1.
Description: this command stores in memory the TAG’s ID correlated with the current date
and time.
1: enable function. 0: disable function.
10.1.20 Gets the “store in memory” function status
• Command syntax: “?SM” [CR]
• Command answer: [CR][LF] ”SM=#” [CR][LF]
• Command action: gets the “store in memory” function status
• Parameter range: #= 0 or 1.
Description: this command returns the store in memory function status.
10.1.21 Sets the “memory hit” function
• Command syntax: “.MH#” [CR]
• Command answer: [LF]
• Command action: sets the “memory hit” function
• Parameter range: #= 0 or 1.
Description: this command enables and disables the memory hit function.
1: enable function. 0: disable function.
10.1.22 Gets the “memory hit” function
• Command syntax: “?MH” [CR]
• Command answer: [CR][LF] ”MH=#” [CR][LF]
• Command action: gets the “memory hit” function status
• Parameter range: #= 0 or 1.
Description: this command returns the memory hit function status.
1: enable function. 0: disable function.
10.1.23 Sets the “selected hit” function
• Command syntax: “.SH#” [CR]
• Command answer: [LF]
• Command action: sets the “selected hit” function
• Parameter range: #= 0 or 1.
Description: this command enables and disables the selected hit function.
1: enable function. 0: disable function.
10.1.24 Gets the “selected hit” function
• Command syntax: “?SH” [CR]
• Command answer: [CR][LF] ”SH=#” [CR][LF]
• Command action: gets the “selected hit” function status
• Parameter range: #= 0 or 1.
Description: this command returns the selected hit function status.
1: enable function. 0: disable function.