UM-0085-B09 DT80 Range User Manual Page 388
RG
return a test report
return line n of the test report
file
return contents of a text file
return contents of error log
return contents of event log
jobspec
allow specified job(s) to be overwritten when a new job is entered
lists all user accounts
list the user account
username
password
create or change password for the user account
username ACTION=DEL
removes user account from the device
username
grants administrator (ADM) rights to the user account
displays the current logged in username
trigger schedule X
trigger schedule sched
define polynomial function #
n
(all parameters other than
a
Table 19: DT80 Command Summary
Note that the spaces shown between commands and parameters are generally optional, e.g. BEGIN"LUPIN" and
BEGIN "LUPIN" are equivalent.
If multiple commands are specified on one line they should normally be separated by semi-colons (;), e.g.:
U; PAUSE 5000; LOGONA
Although these may be omitted if the result is unambiguous, e.g.:
GA GB GC LOGONA
To Next Page
