Datavan Facelook X1 - Access Control Settings; Communication Management

17 / 24
Facelook X1 User’s Manual
2.3.5 ACCESS CONTROL SETTINGS
When the person is verified, the device sends signal to trigger gate to open. The
trigger signal can be configured depending on the requirements.
Unlock Length: The signal lasting time for open.
Unlock Delay: The delay time for open triggering.
Unlock Interface: Select the interface to send signal.
Warning Signal: Send the warning signal to relay.
2.3.6 COMMUNICATION MANAGEMENT
1. Platform Access
Server Address: Fill server address if any. The default listening port is 9002.
2. Network Settings
In this page, set the network as [DHCP] or [Static IP] to specify an IP address.